Product range and capabilities(d) metal forming(i) as sintered condition1) sintered pellets in 6 grades percentage of cobalt varying from 6 to 26 and in 3 grades percentage of nickel varying from 6 to 15 dia 10mm to 163 mm and heights from 2 mm to 150 mm with l/d ratio of 5 for small sizes and 1 for large diameters2) rods& flats in different grades sizes varying from 3 mm to 25 mm and lengths upto 350 mm 3) seal rings in both cobalt and nickel binders sizes upto dia 163 mm.4) wear parts in various shapes, styles, grades with limitation of sizes as above.(ii) in finished conditions1) bar& tube round, squares, hexagon shape boreDrawing dies diameters upto 90 mm including floating plugs2) seal rings finished to ground condition except lapping3) powder very intricate shapes and varying sizesCompacting dies made to very close tolerances of +/- 5& core rods m and polishing by lapping to 0.8 m cla4) wear parts to very close tolerances in various sizes and shapes ground to tolerances +/- 5 m mm and lapped to 0.8 m cla