We are Proline Palisade based in Benoni , South Africa. We aremember of Tradekey.com since November, 2010. Our business isrelated to Security & Protection industry and we specificallydeal in Palisade Fencing & Gates. Please find our productdetails below: Manufacturing Palisde Fencing & Gates''Palisade fencing and gates are still the best way of securingyour premises, which is also good-looking and therefore adds valueto your property investment" Proline Palisade was established in1998 to manufacture palisade fencing and gates. It has since grownto be the biggest manufacturer of these items in Southern Africa.We manufacture a range of palisade panels and gates using: 40x40mmcold rolled angle of 2mm thickness and 120mm or 90mm gaps betweenpales welded on a 40x40 2mm thickness hot rolled angle iron.30x30mm cold rolled angle of thickness 2mm and a 100mm gap betweenpales welded on a 40x40 2mm thickness hot rolled angle iron.Anything narrower or thinner is not strong enough and can be benteasily. Panel heights: from 500mm to 3 000mm (0.5 meter to 3.0meters) Panel widths: normally 3 meters, but it can be customisedto your need. Panels are unpainted. Each paling can be had with nospikes, three spikes or seven spikes. Types of panels and gates:straight or arched, with or without doggie bars. Panels with doggiebars. Gates are made to order and include wheels and rail, angleiron as guide beam and guide roller. No 2 Belfast Street (CornerBelfast and Indiana Streets) Apex Industrial Sites BenoniManufacturing Palisde Fencing & Gates ''Palisade fencing andgates are still the best way of securing your premises, which isalso good-looking and therefore adds value to your propertyinvestment" Proline Palisade was established in 1998 to manufacturepalisade fencing and gates. It has since grown to be the biggestmanufacturer of these items in Southern Africa. We manufacture arange of palisade panels and gates using: 40x40mm cold rolled angleof 2mm thickness and 120mm or 90mm gaps between pales welded on a40x40 2mm thickness hot rolled angle iron. 30x30mm cold rolledangle of thickness 2mm and a 100mm gap between pales welded on a40x40 2mm thickness hot rolled angle iron. Anything narrower orthinner is not strong enough and can be bent easily. Panel heights:from 500mm to 3 000mm (0.5 meter to 3.0 meters) Panel widths:normally 3 meters, but it can be customised to your need. Panelsare unpainted. Each paling can be had with no spikes, three spikesor seven spikes. Types of panels and gates: straight or arched,with or without doggie bars. Panels with doggie bars. Gates aremade to order and include wheels and rail, angle iron as guide beamand guide roller. No 2 Belfast Street (Corner Belfast and IndianaStreets) Apex Industrial Sites Benoni Thank you for taking the timeto go through our business profile. If there are any question,inquiry or comments, please feel free to contact us.