We produce any specification for steele coils, steel plate, stainless steel, round bar and so on. HR/CR Coil、HR Plate、Wire rod、Strip、Round Bar.HR sheet plate: Q235B, SS400, S235JR, A36; 4.5-20mm X 1500-2000mm X 6000-12000mm.3500mm Wide and Heavy plate line: Q235B, SS400, S235JR, A36 12-58mm X 2000-3000mm X 6000-12000mm(cut edge) 60-150mm X 2000-3000mm X 6000-12000mm(mill edge).For S235JR,J0,J2, available sizes as below: 2.00 mm up to 12.7 mm x 1000 -1530 mmFor S275JR,J0,J2, or SS400, available sizes as below: 2.75 mm up to 12.7 mm x 1000 -1520 mm For S355JR,J0,J2, S355MC, Si: max 0.55%, aiming 0.15%, available sizes as below:6.00 mm up to 12.0 mm x 1150 -1500 mm CE Approval.BSP line (compact steel process line ), Si: max 0.04%, aiming 0.03 %, For S235JR or SS400, available sizes as below: 2.0 mm up 10.00 mm x 1250, 1500 or 1515 mm For S275JR, available sizes as below: 2.00 mm to 10.00 mm x 1250, 1500 or 1515 mmFor S355JR, S355MC, Si: max 0.55%, aiming 0.15-0.25%, available sizes as below: 4.0 mm up to 8.0 mm x 1250, 1500or1515 mm Min quantity for width 1515mm is 3,000mt. CE Approval.